ABS Sanisett Above Ground Lifting Station
BEST ONLINE PRICES
FREEPHONE 0800 112 3134 if you've seen it cheaper.
* Available where Guaranteed Stock Icon Appears Below
ABS Sanisett Above Ground Lifting Station - 07565410
Synthetic, single or twin pumping station, designed as a complete wastewater sump for above ground installation and for fitting with pumps from the Robusta, Coronada, IP, Piranha and MF ranges.
Features:
- Globular shape for extra strength. The above-ground version has a plastic lid (tank must be vented above roof level
- Universally adjustable in height and can be swivelled, thus allowing easy alignment with floor levels and tiling patterns, independent of the inflow or direction of the discharge lines. A 150mm sump extension kit is available as an accessory
- Sanisett 1 is designed for one KS version pump (Coronada, IP, Piranha, MF) or pump with built-in level control (Robusta)
- Sanisett 2 is designed for two non-KS pumps and has a separate KS level control system, with support bracket for discharge line junction piece and KS float switches
- Two inflow ports at 90°C offset (DN 100/150) for DIN push-on connection. Two DN 70 inflow ports one for venting and use as a cable duct (supplied as standard with plug / cable inlet seal). One discharge port DN 50 with R 1½" PVC female adaptor
- Plastic cover for protection of the floor grating during installation work supplied as standard
- Heads up to 20m with Piranha 08/09 pumps
- Suitable for use as a floor drain. Alternatively a stainless steel insert for fitting into the manhole cover to close and seal the run-off vent is available as an accessory
- Maximum allowable temperature of medium 40°C, short term to 60°C (max 5 minutes)
Applications:
- For the effective dewatering of domestic and commercial wastewater (faecal-free), from buildings and areas below the sewer level in accordance with EN 12050-2
- In addition to the pumping of wastewater from washing machines, sinks, dishwashers, showers and bathtubs, the Sanisett is suitable also for the pumping of sewage containing faecal matter outside of areas covered by EN when installed using Piranha pump(s)
- For applications where pumping cannot be interrupted the twin pumping station unit should be installed
**Please note that the pump(s), fitting kits and controls are not included and must be purchased separately. You will require one fittings kit for each pump installed**
| SKU | 07565410 |
|---|---|
| Manufacturers | ABS |
| Manufacturers Warranty | 1 Year |
| Weight | 14.0 Kg |
| Max Temperature | Maximum allowable temperature of medium 40 ºC, short term to 60 ºC (max. 5 minutes) |
| Material | Polyethylene |
Delivery
We offer free standard delivery to any UK address on a 3-5 working day delivery time on all orders over the value of £60 + vat. This is not weight restricted
Next day delivery is charged at £8.50 + vat for items under 35kgs. Orders need to be placed before 5pm Mon-Thurs or 4:30 on Friday for guaranteed Next Day Delivery.
Next day delivery is not avaialble for UK Highlands and Islands. Please click the following link to view postcodes/areas that don't qualify for next day delivery.
Due to some product specifications, there may be a lead time of up to 4 weeks. This is only on a small number of products and you will be contacted upon purchase and entitled to a full refund if required.
For Items over 35kgs, please review our delivery charges here
For full delivery terms please click here
International Delivery
Please click here to view International delivery rates.
If you want your order delivered to a remote area please contact our one of our Sales Representatives on 0800 112 3134 before placing your order and we will assist you further.
Returns
Unused, unaltered items may be returned at the buyers expense for credit upon Online Pump Supplies prior written consent and upon the terms specified by Online Pump Supplies. The buyer assumes all risk of loss of such returned goods until actual receipt and acceptance by Online Pump Supplies. Please click here to view Returns information.
File Downloads
