ABS Coronada 250 Sumbersible Pump Without Float 240v
SKU
01355014
MRRP
£615.00
+ VAT
Our price
£369.00
(+ VAT)
Incl. VAT: £442.80
BEST ONLINE PRICES
FREEPHONE 0800 112 3134 if you've seen it cheaper.
ABS Coronada 250W Sumbersible Pump Without Float 240v - 01355014
The Coronada is a plug-in, stainless steel submersible pump designed to remove wastewater containing solids up to 10mm. This fully flood-proof, pressure-tight encapsulated unit runs continuously until all water is gone.
Construction:
- Fully flood-proof, pressure-tight encapsulated unit with stainless steel outer jacket and screen, motor housing, shaft and impeller
- Single-phase, 50 Hz, 2-pole motor; insulation class F; protection type IP 68. Motor is dynamically balanced with stainless steel shaft. Thermal sensors in the stator switch off the pump in the case of overheating and automatically switch it back on after cooling down
- The stainless steel rotor shaft is supported in lubricated-for-life ball bearings
- Shaft sealing is by means of a lip seal (motor side) and mechanical seal (medium side)
- Discharge outlet with internal thread, built-in check valve, and detachable multi-stage hose adapter
- The medium being pumped flows around the motor housing for optimum heat dissipation. The maximum allowable medium temperature is 50 °C; or up to 60 °C for intermittent usage (max 5 minutes)
Features:
- Corrosion-resistant stainless steel housing and hydraulics
- Built-in checkvalve in the discharge outlet blocks return-flow from the discharge line when the pump is switched off
- Ready for immediate use with discharge connection by pipe (threaded) or hose (detachable adapter)
- Thermal sensors in motor to protect against overheating
- Robust, plastic carrying handle
Applications:
- Domestic and commercial wastewater without toilet waste
- Drainage of pits, swimming pools, and flooded cellars
- Removal of nuisance water from gullies or pedestrian underpasses
SKU | 01355014 |
---|---|
Manufacturers | ABS |
Manufacturers Warranty | 1 Year |
Weight | 4.5 Kg |
Dimensions | 255mm (h) x 154mm (dia) |
Connection Type | 1 1/4 Inch BSP Female |
Motor Size | P2 = 0.30kW |
Full Load Current (FLC) | 2.28A |
Voltage | 240V 1Ph 50Hz |
RPM | 2900rpm |
Cable Length | 10 metres |
Max Flow | 9m3/hr |
Max Head | 7m |
Max Temperature | 50°C (60°C for intermittent usage - max 5 minutes) |
Material | Stainless Steel |
Seal Type | NBR |
Impeller Material | PPO |